1

1

SERIE 19


HIGH RESOLUTION BLIND HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS

  • Resolution up to 50.000 pulses per turn
  • Easy to install, two mechanical options, shaft fixing by setscrew or clamp
  • External diameter 58 mm
  • Blind hollow shaft Ø 6, 8, 10, 12, 14 or 15 mm
  • Protection class IP65 according to DIN EN 60529
  • Anti-rotation system through flexible flange or pin torque support
  • Connection by cable (other cable lenght available) or industrial connector M12, M23
  • Female connector included
MECHANICAL SPECIFICATIONS
Materials Housing: Aluminium
Flange: Aluminium
Shaft: Stainless Steel
Bearings Ballraces
Bearings lifetime 1×1010 rev.
Housing fixing Anti-rotation pin or Flexible flange
Permitted misalignment ±0.5 mm axial, ±0.3 mm radial (90.1014, 90.1024)
Shaft fixing Clamp or Setscrew
Blind hollow shaft diameter 6, 8, 10, 12, 14 or 15 mm
Maximum number of revolutions permitted mechanically 6000 rpm
Protection against dust and splashes according to DIN EN 60529 IP65
Rotor inertia moment 30 gcm2
Starting torque at 20ºC (68ºF) ≤ 0,02 Nm
Maximum load permitted on axial shaft 40 N
Maximum load permitted on radial shaft 80 N
Weight aprox. 0,5 Kg
Operating temperature range -20ºC to +80ºC – Standard
-40ºC to +80ºC – Special Customer HT00
Vibration according to DIN EN 60068-2-6 100 m/s2 (10Hz…2000Hz)
Shock according to DIN EN 60068-2-27 1000 m/s2 (6ms)
Maximum pulses per turn 50.000
Radial connection 2 meters cable or industrial connector M12, M23
(other cable lenghts available on order)
Female connector included

 

OUTPUT SIGNALS
OUTPUT CIRCUIT NPN Open Collector RS422 (TTL compatible) RS422 (TTL compatible) Push-Pull Differential
Power supply 11…30 VDC 11…30 VDC 5 VDC ±5% 11…30 VDC
Output voltage 11…30 VDC 5 VDC 5 VDC 11…30 VDC
Consumption 40 mA Tipical: 80 mA
Max: 160 mA		 Tipical: 70 mA
Max: 150 mA		 Tipical: 45 mA
Max: 150 mA
Max. load capability / channel 40 mA ±20 mA ±20 mA ±30 mA
Lenght of cable allowed 50 m (24 VDC) 1200 m 1200 m 100 m
“Low” signal level VOL < 0.4 VDC (24 VDC) VOL < 0.5 VDC VOL < 0.5 VDC VOL < 2.5 VDC
“High” signal level VOH > 22 VDC (24 VDC) VOH > 2.5 VDC VOH > 2.5 VDC VOH > VCC – 3 VDC
Frequency 100 kHz 300 kHz 300 kHz 200 kHz
Short circuit protection Not permanent Yes Yes Yes
Protection polarity inversion Yes Yes No Yes
Channel B leads (90° electric) channel A, view from the shaft, shaft rotating clockwise